©creating a "Blackwork" Design in 3D Cross Stitcher

Creating a Blackwork Design in
3D Cross Stitcher

View a few videos on "quickly" creating a "Blackwork" Design in
3D Cross Stitcher

Below are four videos on creating a blackwork design "manually"
in the 3D Cross Stitcher Software.
This can also be done in the VIP Creative Cross Stitcher software.
The image is from the "Blackwork Archives"
website - http://blackworkarchives.com/ -
and when you get to the website,
just right-click on the image you want to download and select "save picture as."
I hope you enjoy the videos.

Jan Smith

Left-click on a video to view it;
right-click to download
(select "save target as").

3D Blackwork - Video Part One

3D Blackwork - Video Part Two

3D Blackwork - Video Part Three

3D Blackwork - Video Part Four

Insert "Tie-offs" in Blackwork design
using 3D Stitch Editor

It has been brought to my attention that when creating "Blackwork"
in 3D Cross Stitcher, sometimes you need to add tie-offs so your stitches won't pull out.
Below, you can view some videos showing you how to do this in 3D Stitch Editor.
Left-click to view; right-click to download.

I hope you enjoy this mini-lesson. Jan

Grapes Tie-off -1

Grapes Tie-off-2

Grapes Tie-off-3